I'm looking for the kind of cable as below requirements: Features The conductor is made of tin-plated annealed soft copper conductor The insulation is made of ethylene-propylene rubber insulation, ...

I'm looking for the kind of cable as below requirements: Features The conductor is made of tin-plated annealed soft copper conductor The insulation is made of ethylene-propylene rubber insulation, the nominal thickness of the insulation is 5.0mm, and the thickness of the thinnest point is not less than 4.4mm. The insulation extrusion is extruded and the semiconductor internal shielding and peelable external shielding are extruded. The shielding layer of the power core 50mm2 and below consists of mixed braiding of tin-plated copper wire and fibers; the shielding layer of the power core 70mm2 and above consists of tin-plated copper wires knitting The outer sheath is made of neoprene with good weather resistance. The nominal thickness of the sheath is 2.0mm, and the thinnest point is no less than 1.6mm The outer sheath of the cable has obvious yellow, green and red phase marks. Technical Parameters Material Tin-plated copper conductor + EPDM rubber Rated voltage(volts) 8.7/15KV Partial discharge 15KV,≤10pC Impact pressure 95KV, 10 times each of positive and negative poles without breaking through Power frequency withstand voltage The cable should withstand current 39KV, and the voltage withstand test of 5min will not break down Bending radius "The minimum bending radius is 6 times the cable diameter " Usage rated frequency 50Hz Type P/N Spec. D_AERF8715KV02M cable ERF-8.7/15KV Red D_AERF8715KV04M cable ERF-8.7/15KV Yellow D_AERF8715KV05M cable ERF-8.7/15KV green

Ler mais