Zhangjiagang free trade zone kenshine international trading Co.,LTD

CZ Series Chemical centrifugal pump is a horizontal single-stage single-suction centrifugal pump, its size, performance in line with the DIN24256/ISO2858 standard. CZ Series chemical pump performance range includes IH series of standard chemical pump all the performance, its efficiency, cavitation performance and other indicators are more than IH series of standard chemical pumps, can be with IH series of standard chemical pumps for single-machine interchange.

Mainly used to transport high-temperature liquids, neutral or corrosive liquids, clean or liquid containing solid particles, especially for chemical, petroleum, refinery, paper mills, pulp and sugar industries, as well as media with special requirements.
Performance Range
Flow: 3.2~2000m3/h
Lift: 7~160m
Speed: 2900r/min, 1450r/min
Caliber: 32~300m
Operating Temperature: -80℃~+300℃
Working pressure: 2.5MPa The characteristic curve is flat, the cavitation value is low and the efficiency is high.

These characteristics are also maintained when the load is disgruntled.
Model description

CZ50-200A CZ is the chemical pump series code; 50 indicates the pump outlet diameter (mm); 200 indicates the impeller nominal diameter (mm); A indicates that the outer diameter of the impeller has been cut for the first time
Conveying Media
(1) Various temperatures and concentrations of sulfuric acid, nitric acid, hydrochloric acid and phosphoric acid and other inorganic acids and organic acids.
(2) alkaline solutions such as sodium hydroxide and sodium carbonate at various temperatures and concentrations.
(3) All kinds of salt solution.
(4) A variety of liquid petrochemical products, organic compounds, as well as other corrosive raw materials and products. At present, our company's corrosion-resistant materials, to meet the requirements of the above-mentioned media.

When ordering, please provide the user with the details of the media to be transported.
Design features The pressure acting at the shaft seal is balanced by the balance hole on the secondary blade or impeller. Shaft seal can be used not only soft filler seal (can be cooled, can not cool), but also can use a variety of structures of single, double-end surface balance, non-balanced mechanical seal. Ball bearings are durable and have ample shaft diameter to ensure smooth operation. Part of the size of the pump body is designed as a double worm housing to balance the radial force. The bearing frame, including shafts, impellers, filler letters, etc., forms a composite component so that the pump body does not have to be removed from the pipe during maintenance (the motor does not have to be removed if the lengthening coupling is used). Flange design, using PN16, PN25 two (depending on the material), can also be used in ANSI125 pounds/square inches or 150 lb/sq in inches.