Yantai Maiduo New Material Technology Co., Ltd.

Benchmark Product Name | Color | Typical Viscosity (cps) | Mixing Ratio | Initial Curing Time/Full Curing Time | Shear Strength | Curing Method | TG/℃ | Hardness/D | Elongation at Break/% | Temperature Resistance/℃ | Storage | Typical Product Application 352 | Light Amber | 15000-26000 | Single Component | <10s@100mW/cm2 | Steel and Glass | 21.5N/mm² | UV + Heat Accelerator Secondary Curing | 45 | 60 | 290 | -55℃-135℃ | 2℃-28℃/12 Months | General-purpose classic product, tough, flexible, impact-resistant, and moisture-resistant after curing, commonly used for glass bonding. 352LV | Light Amber | 1500-3500 | Single Component | <10s@100mW/cm2 | Steel and Glass | 26.5N/mm² | UV + Heat Accelerator Secondary Curing | 45 | 75 | 180 | -55℃-135℃ 2℃-28℃/December A general-purpose classic product, after curing it is tough, flexible, impact-resistant, and moisture-resistant. Commonly used for glass bonding. UV326 Light Amber 16000-24000 Single Component <10s@100mW/cm² Steel and Glass 24.5N/mm² UV + Heat Accelerator Secondary Curing - 65 80 -55℃-120℃ 2℃-28℃/December A single-component, high-viscosity anaerobic structural adhesive. UV326 is suitable for bonding most materials. This product cures when exposed to suitable UV light. Surface bonding can also be cured with a surfactant. Industrial applications include bonding and sealing of speakers, voice coils, and diaphragms. 3491 Transparent, light straw color 750-1500 Single component <1s@100mW/cm2 Steel and glass 10N/mm² UV 365 nm - 75 27 -55℃-150℃ 2℃-28℃/12 months Fast curing, medium viscosity, suitable for bonding glass to itself and glass to many other material surfaces. Automotive lighting components, molded glass tableware, rough glass surfaces. 3492 Transparent liquid, 350-600 ppm, single component, <1s@100mW/cm², steel and glass, 8.3N/mm², UV 365 nm, -79 ppm, 5-55℃-150℃, 2℃-28℃/12 months. "Cures within seconds under 365nm UV light, forming an impact-resistant adhesive layer that resists long-term moisture or water immersion. Primarily used for bonding, sealing, or potting glass to itself or other materials, such as decorative glass with rough surfaces, molded glass tableware, and automotive lighting components. Viscosity products can be used in applications requiring self-leveling." 3493 Transparent liquid, 5000-7000 ppm, single component, <1s@100mW/cm², steel and glass, 8.6N/mm², UV 365 nm, -75 ppm, 260 ppm, -55℃-150℃. 2℃-28℃/December. Cures within seconds upon exposure to 365nm UV light, forming an impact-resistant adhesive layer resistant to prolonged moisture or water immersion. Primarily used for bonding, sealing, or potting glass to itself or other materials, such as decorative glass with rough surfaces, molded glass tableware, and automotive lighting components. 3494 Transparent Liquid 5000-7000 Single Component <5s@100mW/cm² Steel and Glass 16.8N/mm² UV 365 nm - 63 190 -55℃-150℃ 2℃-28℃/December. Cures within seconds upon exposure to 365nm UV light, forming an impact-resistant adhesive layer resistant to prolonged moisture or water immersion. Primarily used for bonding, sealing, or potting glass to itself or other materials, such as decorative glass with rough surfaces, molded glass tableware, and automotive lighting components. 3430 Red viscous liquid, 3500-7000 N/cm², single component, <5s@100mW/cm², acrylic and acrylic >8N/mm², UV 365 nm - 70A, 200°C -55℃-130℃, 2℃-28℃/12 months. UV3430 is a single-component, high-viscosity, UV-curable adhesive. This product is mainly used for bonding voice coils and diaphragms in audio equipment such as speakers. Under sufficiently strong UV light, it can quickly cure to form a soft adhesive layer. This product exhibits good adhesion properties to plastics, glass, and most metals. 3103 Transparent to slightly cloudy liquid 8000-14500 Single component <5s@50mW/cm2 Polycarbonate 11N/mm² UV 365 nm - 51 260 -55℃-150℃ 2℃-28℃/12 months Suitable for stress-sensitive materials, strong adhesion to PC/PVC/PMMA/ABS. Primarily used for polycarbonate bonding, and does not cause stress cracking under typical molding stress. 3103 rapidly cures under sufficiently strong UV or visible light to form a flexible, transparent adhesive layer. This product exhibits good adhesion properties to most substrates, including glass, many plastics, and most metals. 3311 Transparent liquid 300-400 Single component <5s@50mW/cm2 Polycarbonate 5.2N/mm² UV 365 nm - 64 265 -55℃-150℃ 2℃-28℃/12 months Classic medical-grade needle adhesive, low viscosity and good processability. 3321 Transparent Liquid 3500-7500 Single Component <5s@50mW/cm2 Polycarbonate 5.2N/mm² UV 365 nm - 53 250 -55℃-150℃ 2℃-28℃/12 months Classic medical-grade needle adhesive, medium to high viscosity, high bonding strength. Suitable for applications requiring large gap filling capacity and flexible adhesive layer at the bond, used to bond rigid or flexible PVC to polycarbonate. Its flexibility enhances the load-bearing capacity of the bonding surface and improves shock absorption properties. This product exhibits excellent adhesion to most substrates, including glass, many plastics, and most metals. 3106 Transparent Liquid 3500-7500 Single Component <5s@50mW/cm² Polycarbonate 5.2N/mm² UV 365 nm - 53 250 -55℃-150℃ 2℃-28℃/12 Months Suitable for stress-sensitive materials, strong adhesion to PC/PVC. This product exhibits excellent adhesion to most substrates, including glass, many plastics, and most metals. 3703 Paste Bone White to Beige 18000-35000 Single Component <5s@50mW/cm² Polycarbonate and Polycarbonate 18N/mm² UV 365 nm - - 85 -55℃-150℃ 2℃-28℃/12 Months Used for camera module industry bezels and optical lens fixing. Light amber color for wire harness binding 190024