Tangshan RuiLin Solids Control

Supply of high-efficiency drilling fluid desanding Drilling fluid desanding machine mud desanding machine factory direct sales Brand: Ruilin Technology
Product features: The drilling fluid desanding device produced by the company is mainly used to separate the solid phase particles with a particle size of 47-76μm in the drilling fluid.
This product has the characteristics of small size, high efficiency, low noise and long service life. CSQ cyclone desander 8" above the cyclone combination is called desanding, commonly used is 8", 10", 12" cyclone, mainly used to separate drilling fluid particles (desander) is a secondary solid control system for processing drilling fluid, according to the size of the cyclone diameter, divided into cyclone desander and cyclone sludge remover. Solid-phase particles with a general degree of 47-76 μm. According to the size of the processing capacity required by the customer, several groups of cyclones are selected to combine into a desanding device. Ruilin Technology's swirl desanding device is widely used in oil drilling, horizontal directional crossing, sewage treatment and other desanding separation.

Model Throughput Cyclone size Working pressure Inlet pipe diameter Discharge pipe diameter Separation particle size Screen area
CSQ200 ≤120m3/h≤528GPM 8″ 0.15~0.35Mpa 125mm 150mm 47-76μm 1.0m2(600×1600mm)

CSQ250 ≤180m3/h≤792GPM 10″ 0.15~0.35Mpa 150mm 200mm 47-76μm 1.0m2(600×1600mm)

CSQ300 ≤240m3/h≤1056GPM 12″ 0.15~0.35Mpa 150mm 200mm 47-76μm 1.0m2(600×1600mm)