Shanghai KuKa Special Cable Co

Basic information:
Reference: BY1-C0200
Dimensions: 6.0 square millimeters
Conductor: 84 / 0.285
Insulation diameter (mm): 4.2
Insulation color: black
The diameter of the jacket is indicated. (mm): 6.5
Jacket color: red
Rated current A:41 at 60 degrees C
1. Apply
FOLLOWRAY solar cables are used for interconnecting and wiring of grounded and unsoiled photovoltaic power generation systems
2. Cable design
(1) Conductor: Tinned copper wire wire in accordance with category 5 of IEC 60228
(2) Insulation: halogen-free polyethylene, electron beam crosslinking
Color: Black
(3) Jacket: halogen-free flame retardant polyethylene, electron beam crosslinking
Water-resistant, UV-resistant
Jacket color: black, red
3. Temperature range
The maximum temperature of the conductor is -40 degrees C to 120 degrees C
Temperature range -40C to -90C (minimum 25 years)

4. Electrical characteristics
The standard voltage is U0 / U AC 600 / 1000V, DC 1500V
Mat.DC voltage 1800V (conductor-conductor,
Non-grounded system, circuit is not under load)
AC test voltage 6.5KV
The surface resistance of the minimum sheath 109Ώ
According to other tests of EN 50395
5, mechanical characteristics
Minimum bending radius of 5 x cable diameter
The stretch strength and elongity rate are in accordance with EN 60811-1-1
Cold bends are made according to EN 60811-1-4
Heat resistance is in line with EN60216-2
6. Environmental characteristics
Halogen-free in accordance with TUV 2PFG 1169 / 08.2007 Appendix B
Ozone resistance conforms to EN 50396
UV resistance is HD 605 / A1 compliant
The flame characteristics are in accordance with IEC 60332-1-2
7, mark
TUV 2 PFG 1169 PV1-F 1× 6.0 mm2 Ningbo Follow Reiter Cable Co., Ltd
8, industry standards
TUV 2pfg 1169 / 08.2007