Qinsun Instruments Co., LTD

Martindale Abrasion And Pilling Tester<br />
<br />
Testing Standards:<br />
 <br />
ASTM D4970, ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/12947.2, M&S P17/P19/P19C, NEXT 18/18a/18b, ISO 5470-2, IWTO-40, JIS L1096 8.17.5 Method E, Woolmark TM 112/196, BS EN 388/530/13770, ISO 20344<br />
 <br />
Product Information:<br />
 <br />
The instrument is professionally designed to determine the abrasion and pilling resistance of all kinds of textile structures.<br />
<br />
Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.<br />
<br />
Provided with Touch Screen Controller and unique programming device which includes preprogammable batch and totaliser counters, individual station counters, 4 selectable test speeds with liquid crystal display.<br />
 <br />
Technical Parameters:<br />
 <br />
1.Test positions: 9;<br />
 <br />
2.Count range: 0～999999;<br />
 <br />
3.Maximum stroke: horizontal 60.5±0.5mm, longitudinal 24±0.5mm;<br />
 <br />
4.Weight of pressurized materials:<br />
 <br />
a.Clamp holder assembly: 200±1g<br />
 <br />
b.Loading pieces for smaller piece: 395±2g<br />
 <br />
c.Loading pieces for larger piece: 594±2g<br />
 <br />
d.Stainless steel piece: 260±1g<br />
 <br />
5.Additional loading weight valid abradent diameter:<br />
 <br />
Type A 200g(1.96N)  Pressure(9KPa)  ￠28.8-0.084mm<br />
 <br />
Type B 155g(1.52N)  Pressure (12KPa)  ￠90-0.10mm<br />
 <br />
6.The relative speed with Clamp holder and Abrading table: 20-70r/min(Adjustable);<br />
 <br />
7.Weight of ample loading hammer: 2385±10g.<br />
<br />
Instrument Configurations and Consumables:<br />
 <br />
1.Specimen holder assembly of 9 sets;<br />
 <br />
2.9kPa, 12kPa additional loading weight , each of 9;<br />
 <br />
3.￠38mm, ￠140mm Abradent Fabric/Backing Felt cutter of 1 set;<br />
 <br />
4.￠38mm, ￠140mm test specimen cutting mat of 1 set;<br />
 <br />
5.Pilling Test Suite of 1 set;<br />
 <br />
6.SM-50 Photographs for pilling test of 1 set;<br />
 <br />
7.EMPA Photographic Standards for Pilling Test of 1 set, and SM-25 Standard Abradent Fabric of 1.6m×5m;<br />
 <br />
8.Standard Backing Foam. Width of 1.5m, Length of 0.5m. Pack of 4;<br />
 <br />
9.Standard Backing Felt Piece of 1;<br />
 <br />
10.￠90mm Standard Backing Felt Discs(Pack of 20);<br />
 <br />
11.￠38mm, ￠140mm spare blades of specimen cutter, 50 each;<br />
 <br />
12.Other necessary accessories recommended by manufacturer.