Pebe Máquinas e Equipamentos Ltda

AUTOMATIC CUTTER AND PACKAGER PSE-840/S

COMPOSITION
Unwinding units;
Cutting unit;
Output conveyor and vibrating table;
Packaging system for A4 reams - 500 sheets.

TECHNICAL CHARACTERISTICS OF THE CUTTING SYSTEM

UNWINDER
One to three unwinding units;
Coil feeder with pneumatic arms;
Constant paper tension through a load cell with automatic micro-processed control;
Automatic margin setting device;
Pneumatic brake with digital controller;
Individual tensioner for each coil;

CUTTING UNIT
Scissor-type cutting system with knife and counterknife;
Prevents burrs on the cut sheet;
Static eliminator set;
Rotating cutting discs for removing side trim and for opening the coil from 840mm to 210mm;
Cuts A3, A4, Legal 2, Legal 9, Letter sizes.

OUTPUT CONVEYOR AND VIBRATING TABLE
Conveyor for transporting the cut paper with constant segment;
Dispenser wheels for flake formation;
Electropneumatic system for ream separation;
Vibrating table forming three reams simultaneously;
Automatic removal system of the ream to the conveyor belt.

TECHNICAL DATA
Maximum paper width: 860 mm;
Maximum coil diameter: 1200 mm;
Grammage: 50 to 120g/m²;
Various types of substrates;
Main drive by alternating current motor with 10 HP;
Pneumatic supply with pressure of 6.0 kgf;
Digital counter through inductive sensor;
Electro-electronic protection system;
Maximum speed 180 m/minute;
General control system via PLC;

TECHNICAL CHARACTERISTICS OF THE PACKAGING SYSTEM FOR A4 REAMS - 500 SHEETS

PACKAGING SYSTEM
Automatic ream feeding system (500 sheets/ 75g/m²);
Packaging speed: 5 seconds / ream;
Heating elements for sealing the BOPP film packaging;
Unwinding and cover cutting, through knife and counterknife controlled by optical sensor on the mark on the register;
Folding and packaging, with three stages of folding, activated by electro-pneumatic command;
Construction in steel structure and parts with anti-corrosion treatment;
12 sensors for control and command confirmation.

TECHNICAL DATA
Three-phase electrical supply;
Maximum consumption: 10 amps;
Pneumatic supply 6kgf;
Maximum cover coil diameter 600mm;
Maximum cover coil width 385mm;
Recommended sheet gram weight 75g/m²;
Adhesive application temperature 160°C to 180°C;
General control system via PLC.
Production:
PSE-840\1 = 4 reams/minute
PSE-840\2 = 8 reams/minute
PSE-840\3 = 12 reams/minute