hongking communication technology（shenzhen）co.,limited

We are manufacture of fiber optci splitter in china

We produce different kinds of Fiber Splitter with good quality and competitive price

1: modular PLC splitter

2: Mini type PLC splitter

3: Cassette type PLC splitter

3: FBT splitter

Port type: SC/LC/FC/ST, APC/UPC



PLC (Planar Lightwave Circuit) splitters are Single Mode Splitters with an even split ratio from one input fiber to multiple output fibers. It is based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability. powerlink provides a various of 1×N and 2×N PLC splitters, including 1×2 to 1×64 and 2×2 to 2×64 Mini Plug-in type fiber PLC splitters. They are all with superior optical performance, high stability and high reliability to meet various application requirements.



Features

Configuration Type: 1xN, SC/UPC/APC connector

Good channel-to-channel Uniformity

High Polarization Extinction Ratio

Low Input Polarization Sensitivity, Insertion loss≤4.4dB, PDL≤0.2dB

Compact design, Custom and Rugged Packaging Available

Operating temperature : – 40 to 85°C

Operating bandwidth: 1260- 1650nm

Telcorida GR-1209/ 1221 Qualified





1XN PLC splitter(with connector)



Parameters 1x2 1x4 1x8 1x16 1x32 1x64

Operating Wavelength (nm) 1260~1650

Insertion Loss (dB) ≤4.3 ≤7.5 ≤11.0 ≤14.0 ≤17.0 ≤21.0

Loss Uniformity (dB) ≤0.6 ≤0.6 ≤0.8 ≤1.2 ≤1.5 ≤1.8

PDL (dB) ≤0.2 ≤0.2 ≤0.2 ≤0.3 ≤0.3 ≤0.3

Return loss(dB) UPC≥50dB; APC≥55dB

Directivity (dB) ≥55

Pigtail Length (m) 1m or customer specified

Fiber Type G657A or customer specified

Operation temperature(℃) -40~85

Note:



All measurements were done at room temperature.



Above parameters all testing at 1310nm,1550nm wavelength, if it test at 1260~1300nm,1600~1650nm,then insertion loss would be add 0.3dB based on above parameters.



Table2. 2XN PLC splitter(with connector)



Parameters 2x2 2x4 2x8 2x16 2x32 2x64

Operating Wavelength (nm) 1260~1650

Insertion Loss (dB) ≤4.5 ≤8.0 ≤11.7 ≤14.7 ≤17.9 ≤21.2

Loss Uniformity (dB) ≤0.8 ≤1.0 ≤1.0 ≤1.5 ≤2.0 ≤2.5

PDL (dB) ≤0.2 ≤0.2 ≤0.2 ≤0.3 ≤0.3 ≤0.3

Return loss(dB) UPC≥50dB; APC≥55dB

Directivity (dB) ≥55

Pigtail Length (m) 1m or customer specified

Fiber Type G657A or customer specified

Operation temperature(℃) -40~85

Note:



All measurements were done at room temperature.



Above parameters all testing at 1310nm,1550nm wavelength, if it test at 1260~1300nm,1600~1650nm,then insertion loss would be add 0.3dB based on above parameters.