Titan Machinery

TITAN 240D4 — automated high-pressure brick & block press
TITAN 240D4 is a compact, fully automatic hydraulic press for continuous production of facing bricks, thin bricks/tiles, blocks, and pavers. It combines high forming force with fast cycles, delivering dense, crisp-edged products with tight dimensional scatter—ideal for premium architectural masonry and paving in a small footprint.

What it makes
Facing and common bricks with architectural surface quality

Blocks and pavers/tiles, including thin formats for façades and landscaping

Concrete/cementitious or mineral-fines recipes with pigments and additives under recipe-controlled cycles

Why plants choose TITAN 240D4
Real throughput, small footprint — up to 10 strokes/min and ~1,600 bricks/h (nominal format)

High density & finish — strong compaction for sharp arrises and reliable green strength

Line-ready automation — integrates with dosing, intensive mixing, green handling, curing, and packing

Easy to run & maintain — modern HMI with recipe library; service-friendly access and industrial-grade components

Technical parameters
Press power: 251,000 kgf

Ejection power: 20,000 kgf

Maximum capacity (nominal brick): 10 strokes/min; up to ~1,600 bricks/hour, ~12,800/shift, ~38,400/day

Filling depth: 220 mm

Max operating pressure: 297 bar (29.7 MPa)

Total connected electric load (50 Hz): 33 kW

Cooling water consumption: 2.0–4.0 m³/h at 25 °C

Compressed air consumption: 30 L/min at 5 bar (0.5 MPa)

Hydraulic oil (per fill): ≈640 L

Total weight: ≈5,700 kg (without additional equipment)

Heaviest component for rigging: ≈3,300 kg (complete press body during assembly)

Overall size: height ≈3,778 mm; plan ≈3,045 × 2,667 mm

Performance depends on product format, tooling (single vs. multi-cavity), and the configuration of upstream and downstream equipment.

Typical line configuration
Dosing & intensive mixing (aggregates/mineral fines, cement, water, pigments)

High-pressure forming on TITAN 240D4 with recipe-driven pressure/time profiles

Green handling — gentle ejection, transfer, and grouping to protect edges

Curing — ambient or accelerated, product-dependent

Finishing & packing — optional surface processing and palletising

Options & services
Custom molds/dies for bricks, blocks, tiles, and interlocking formats

Pigment/admixture dosing, dust-control and cold-climate kits

Layout engineering, installation & commissioning, operator training, and long-term spares support

One-line highlight (for listings)
TITAN 240D4 — a fast, 251-tf high-pressure press delivering up to 10 strokes/min of premium bricks, blocks, and tiles with fully automatic control in a compact footprint.