Fortel Ind e Com Ltda

Robust and versatile floor cutter (cut-off) for cutting metallographic samples from 0 to 120mm. Lateral lever cutting, which shifts the articulated assembly of the motor/cutting disc to the part set in the Vise, which provides the highest operator safety.
Structure of sturdy construction equipment in treated steel 1020 with thickness 1.9 mm with phosphonic bath, textured epoxy paint (layer 80 microns) for protection against corrosion. All machined parts (vise, motor shaft, engine base and drive lever) are nickel-plated, providing greater durability.
Efficient fixation system of the test body through double walrus in steel treated with clamping through a spindle and with cheek, for fixation of disform parts. Optional manual Y-axis drive or through spindles. Cooling and lubrication system through 2 flexible nozzles with directional flow adjustment, coolant recirculation pump, installed in the external reservoir with capacity of 30 liters (can be larger if necessary).
Three safety systems that ensure that there is no motor movement of the cutting disc, when the lid is open (according to NR12): monitoring of closing through safety key type interlock; Lid with electromechanical solenoid locking, which prevents its opening with equipment in operation, the opening of the lid will be released only when the disc is stopped; Sensor Type Micro safety switch that shuts off the engine of the machine, if the lid is unduly opened.
Equipment has a cooling pump drive button, which can be triggered and directed with the lid open, independent motor drive button (cut), only possible when the lid is properly closed, power button Front, locking/locking General key, LED Indoor lighting system 5W (450 lm) with protection, LED backlight indicator (green and red), Relay for automatic shutdown If motor heating: overload or lack of phase.
Cutting system through articulated arm enables the work with various sizes and formats of parts has cutting capacity:
100 x 120mm (AxL) with 305 x 2.0 x 31.8 mm Abrasive cutting disc
120 x 120mm (AxL) with 355 x 2.0 x 31.8 mm Abrasive cutting disc
Options Morsas:

• Double vise (X): Double walrus system for fixation of the test body, in treated and nickel plated steel. Locking the specimen on the X-axis via a handle-driven spindle.
• Double Walrus (X and Y manual): Double vise system for fixation of the test body, in treated and nickel plated steel. Locking the specimen on the X-axis via a handle-driven spindle. Manual movement of the Walrus table on the Y-axis (horizontal) for fastening parts of various sizes.
• Double Walrus (X and Y with knob): Double vise system for fixation of the test body, in treated and nickel plated steel. Locking the specimen on the X-axis via a handle-driven spindle. Movement of the Walrus table on the Y-axis (horizontal) through a handle-driven spindle for fastening parts of various sizes.

 Cutting capacity 120mm.
 Automatic braking system of the motor and the cutting disc.
 Three-phase Motor of 3.0 HP with high torque, shielded and grounded. 3380 RPM. or 5, 0CV (optional) Noise: 72 dB (A).
 monitoring of the lid by Interlock type safety switch with solenoid locking and damping system.
 closing lid with side and front displays of polycarbonate according to NBR protection standard.
 Mushroom Emergency stop button, according to ABNT.
 Panel with electrical controls at low voltage 24VDC (NR12).
 Independent button system for cooling pump and motor drive with low voltage LED indicators (24VDC).
 The cutting system is a design designed to use 98% of the cutting disc, saving the spare discs.
 12 Month warranty and permanent technical assistance.
 operation and installation Manual in Portuguese.
 accompanying: Keys for fixing and replacing the cutting disc, cutting Kit: 305 x 2.0 x 31.8 mm flat cutting disc, 1 liter refrigerant oil, water inlet and outlet hoses and electric power cable with plug.