Fortel Ind e Com Ltda

Robust and versatile bench cut-off for cutting metallographic samples from 0 to 40/60/80 100 mm. actuation of the cutting by lateral lever, which shifts the assembly of the motor/cutting disc in meeting the piece fixed in the vise, which provides the highest operator safety.
Structure of sturdy construction equipment in treated steel 1020 with thickness 1.9 mm with phosphonic bath, textured epoxy paint (layer 80 microns) for protection against corrosion. All machined parts (vise, motor shaft, engine base and drive lever) are nickel-plated, providing greater durability.
Efficient fixation system of the test body through double walrus in steel treated with tightening through a spindle with cheek, for fixation of disform parts. Cooling and lubrication system through 2 flexible nozzles with adjustable flow rate, coolant recirculation pump, installed in the external reservoir with a capacity of 30 litres or larger.
Three safety systems that ensure that there is no motor movement of the cutting disc, when the lid is open (according to NR12): monitoring of closing through safety key type interlock; Lid with electromechanical solenoid locking, which prevents its opening with equipment in operation, the opening of the lid will be released only when the disc is stopped; Sensor Type Micro safety switch that shuts off the engine of the machine, if the lid is unduly opened.
Equipment has a cooling pump drive button, which can be triggered and directed with the lid open, independent motor drive button (cut), only possible when the lid is properly closed, power button Front, locking/locking General key, LED Indoor lighting system 5W (450 lm) with protection, LED backlight indicator (green and red), Relay for automatic shutdown If motor heating: overload or lack of phase.
 Three-phase Motor of 2.0 HP with high torque, shielded and grounded. 3380 RPM.
Noise: 65 dB (A).
 monitoring of the lid by Interlock type safety switch with solenoid locking and damping system.
 closing lid with side and front displays of polycarbonate according to NBR protection standard.
 Mushroom Emergency stop button, according to ABNT.
 Panel with electrical controls at low voltage 24VDC (NR12).
 Independent button system for cooling pump and motor drive with low voltage LED indicators (24VDC).
 The cutting system is a design designed for greater use of the cutting disc and saving of spare discs.
 12 Month warranty and permanent technical assistance.
 operation and installation Manual in Portuguese.
 accompanying: Keys for fixing and changing the cutting disc. Cutting Kit: 235 x 1.5 x 19 mm flat cutting disc or 305x2, 0x31 8 mm, 1 liter refrigerant oil, water inlet and outlet hoses and electrical power cable with plug (ABNT standard).