Henan Tongda Heavy Industry Science And Technology Co.

Product information

Product name: to the roller squeeze granulator

Introduction:
The roller extrusion granulation machine is the key equipment of compound fertilizer granulation, with advanced technology, reasonable design, compact structure, novel and practical, low energy consumption, with the corresponding equipment, to form a small production line,
Can form a specific capacity of continuous, mechanized production. The use of eugenic formula, no need to dry, room temperature production, product pressure forming, so that product quality in line with the technical specifications of compound fertilizer requirements,
It is used to produce a variety of crops of high, medium and low concentration of special compound fertilizer and compound fertilizer industry energy saving and consumption reduction of the replacement products.
The roller extrusion granulation machine is the key equipment of compound fertilizer granulation, with advanced technology, reasonable design, compact structure, novel and practical, low energy consumption, with the corresponding equipment, to form a small production line,
Can form a certain capacity of continuous, mechanized production.
The use of eugenic formula, no drying, normal temperature production, product crushing and forming, so that product quality in line with the technical specifications of compound fertilizer requirements, is used for the production of a variety of crops high, medium and low
The new generation of energy saving and consumption reduction in the concentration-specific compound fertilizer and compound fertilizer industry.
This series of granulators, the shape and size of the ball nest on the roller skin can be seen by the user needs, there is a wide range of choices, ball pressure shape has pillow-shaped, semi-circular grain-shaped, rod-shaped, pill-shaped, walnut-shaped, tonsil-shaped and square shape. At present, they are all in the shape of flat balls.

Features:
1. Inlet port mixing device, to ensure uniform feed speed.
2. The main unit is equipped with a self-cleaning device to prevent material from sticking to the roller plate.
3. The adjustment of roller clearance is adjusted by step variable speed gear to ensure uniform clearance and easy operation.
4. Adjust the rollers using the adjustment flower keys in the gear to ensure that the teeth are neat and good bit.
5. All components connected to the material are made of stainless steel to protect against corrosion.
6. Raw materials: ammonia, urea, ammonium chloride, ammonium phosphate, potassium chloride, magnesium sulfate, sodium chloride, ammonium sulfate, etc.
7. The water content of the material before granulation needs to be less than 10%
8. The roller plate temperature is around 30-40 degrees, so no dryer is required
9. With the corresponding equipment, the formation of a small production line.