Baoding Brave Trade Co., ltd

CD 1,MD 1 Series Electric wire Rope Electric hoist is a kind of light and small lifting equipment and advantages

Compact structure light, small size, wide common use and easy operation of Etc.if and hard reducer

Gear surface

exerted, which would have a large lifting force, high mechanical efficiency, equipped with



There is a cone-shaped rotor brake motor, the upper and lower two directions have safety limit device.



The MD 1 electric hoist has a fast lifting speed, high lifting speed and stable accuracy.

CD 1,MD type 1 wire rope electric hoist can be widely used for lifting heavy objects, can also be installed in a single girder crane

Line or Curve

I-beam can also be used for electric hoist double beam,

Gantry cranes and slewing cranes These all make electric hoists in electrical,



Mining, railways, terminals, warehouses and other industries have been widely used.

Electric wire Rope Electric hoist is assembled by different independent units, lifting gear box,

Lifting motor with brake, Rope drum, electronic control board and traveling trolley.

All of these units can be accessed individually and



Rapid disassembly costs and downtime.

Motor: Lifting motor is a kind of tapered rotor motor with braking, which is made by Nanjing Special Motor Factory.

, is the highest quality motor, with a larger torque, so can adapt to frequent mobile, the largest



Torque is 2.4-3 times times the rated torque. Gearbox: Gear box has a special treatment of high wear-resistant gears.

Each gear shaft



are supported by ball or roller bearings to ensure smooth, low friction operation. Wire Rope: The lifting rope conforms to the export standard.

The dominant rope used by drums Does not slip when relaxed.



Safety factor, the nominal fracture strength of the rope is six.

Rope drum:grooved Drum, providing an appropriate length of seamless pipe, was injured in a layer, and Provide proper support for ropes to reduce wear and tear.

The roller shaft is broken down on ball bearings to



ensure smooth operation.

Electrical control System: Model CD 1 and MD 1 by Contactor box, control switch,



The limiting device is composed of the operating voltage of the control switch is 380v,36v or 24V (safety voltage). Rope Guide: Rope guide is divided into two parts to ensure easy access.

It completely wraps around the drum , so that the oil rope will not be loosened even when the hoist is in the unloading state.

My company's Guide rope



The thickening and swelling of the device is not easy to damage. Hook: The hook was tested to a fully loaded 150% before assembling.

Steel Wire Rope Pulley Protective steel castings are used for full protection. All pulleys rotate on ball bearings.



The belt is thicker and expanded than the domestic ordinary belt pulley.

At the same time, my company can also produce other types of electric rope hoist, such as: 16t,20t, lifting height from 30 meters to 100 meters; single wheel and hook pulley

Double rollers and double crochet; even can be based on customer's Request to modify motor voltage.