angestsrl

100% Wood materials pure wood pellets factory price Grade A.B varity packages

Biomass MouldingFuel ("BMF" for short) is a new type of clean fuel that can be directly burned by crushing, mixing, extruding, drying and other processes of agricultural and forestry wastes as raw materials to produce various shapes (such as blocks, granules, etc.)

Wood pellet fuel, as one of the biomass fuels, is a kind of biomass pellet fuel with high cost performance ratio because of its special variety. In addition, its common advantages of biomass pellet fuel make it a popular biomass pellet fuel

Features:

Pine wood particle fuel generally refers to the particle fuel with pine wood as raw material. It is different from Scotch pine particle and miscellaneous wood particle, and it is a biomass particle between the two. The following figure shows pine wood pellet fuel

1. The calorific value of pine pellet fuel is , which is a kind of biomass fuel with high calorific value among biomass fuels. Therefore, when calorific value is required, pine pellet fuel has obvious advantages in calorific value

2. The ash content of pine grain fuel is small, generally 1-3. Compared with coal combustion, this ash content has little ash and residue after combustion. The low ash content greatly improves the utilization rate of pine grain fuel and saves fuel.

3. Pine wood pellet fuel is highly volatile, easy to burn, and can also volatilize into combustible gas for full combustion, which is an advantage that ordinary coal does not have.

4. There is almost no ash residue after the combustion of pine wood particle fuel, which is only 1% - 5% of the total weight. Unlike the large amount of ash residue after the combustion of coal, which accounts for about 30-40% of the total weight, it needs to waste human and material resources to clean up the coal residue, and it is easy to cause secondary pollution to the environment if it is stacked randomly.

5. The main components of combustible gas after pyrolysis during the combustion of pine wood particle fuel are H2, CH4, CmHn, CO, etc. After full combustion, the emission of SO2, CO, NO, etc. is slight. See the figure below for the specific emission comparison. Therefore, the combustion emissions of pine wood particle fuel have a very obvious environmental protection advantage compared with coal.

6. Pine wood pellet fuel has high utilization rate and unit price performance price ratio, and is fuel oil. Compared with gas, electricity and other energy sources, pine wood pellet fuel is a relatively cost-effective energy, which can generally save 50% than oil and gas, and 80% than electricity. Compared with anthracite, it is 10% cheaper and 20-30% more expensive than low-quality polluting coal. Note that under the conditions of environmental protection and economy, biomass pine wood pellet fuel is one of the energy sources with high cost performance.

7. Pine wood pellet fuel is burned on professional biomass burners, steam generators and other equipment. Generally, intelligent operation can effectively control fuel consumption, and truly achieve scientific control without wasting energy.

8. Pine wood pellet fuel is an environment-friendly and renewable energy for resource recovery and reuse. Pine wood pellet fuel is mainly used as leftover materials from furniture factories and board factories. It is used for environmental energy after processing, so pine wood pellet fuel has the property of environmental protection and renewal.



Package:

15-20kgs/bag ; OEM available

1000KGS/Wood pallet or Plastic bag

Size:6mm or 6-8cm