AN Brasil Matrizes e Estampos

6221 - PNEUMATIC STAMPING NEW GOLD LINE (SLIDING DOOR AND WINDOW, SWING DOOR, MAXIM-AR, SWING AND TILT AND INTEGRATED) SLIDING LEAVES Drilling machining for fixing the crossbars and tearing for passages in the rails in the profiles GN008, GN010, GN011, GN012, GN016, GN017, GN031, GN048, GN049, GN096, GN097, GN098, GN100, GN101, GN102, GN113 and GN114; Machining of the tearing for fitting the shell in the profiles GN012 and GN016; Machining of the recess for fitting the cremones in the GN012, GN016 and GN054 profiles; SLIDING FRAMES Machining of the recess and drilling for fixing the lower and upper rails in the GN004, GN025 and GN026 frames; Machining of the recess for fixing the lower and upper rails in the GN045 and GN046 frames; Machining of the recess for fitting the FEC1209/1210 lock in the GN004, GN025, GN026, GN037 and GN051 frames; Machining of the recess for fixing the CAL966 wedge in the GN004, GN025, GN026, GN035, GN037, GN045 and GN467 frames; Machining of the drop-off for fitting the NYL557 accessory in the GN045 and GN046 frames; Machining of the drop-off and drilling for installing the CAL966 shim in the GN004, GN025, GN026, GN037 and GN051 frames; Machining of the drain drop-off in the GN001, GN021, GN022, GN034, GN041, GN059, GN040, GN057 and GN078 rails; Machining of the drop-off of the RM019 finish; MAXIM-AR TURN AND TUMBLE AND TURN DOOR Drilling machining for placement of the connecting tap in the GN018, GN020, GN052, GN054 and GN072 profiles; Machining of the cutout for arm entry in profiles GN018, GN052 and GN054; Machining of the drain cutout and installation of the NYL556 in the maximar frame in profile GN020; Drilling of the drive bar in profile RO016; INTEGRATED Drilling of profile GN035 to fit profiles GN001, GN032, GN033, GN034, GN038, GN039, GN047 and IN039; Machining of the cutout for fitting the tape guide accessory in profiles GN038 and GN047. Machining of the cutout for fitting the collector accessory in profile GN036. Machining of profile GN036 to fit rails GN001, GN033 and GN034;